what do u want a DIY on?

ARC said:
Res said:
PhreekRice said:
Power windows
Coilovers/king springs
Halos WITH projectors
Aaaaannddd mebeh gauges ;)
Click to expand...

all of these have been done short of gauges. have a search ;)
Click to expand...

I only know of the Power Window and Projector DIY's.
Coilovers are a peice of piss... And gauges, I got nuthin :think:
Click to expand...
guess I better get my hands on some power windows then lol after I changed the door trim in my car the window winding thing keeps falling off -.-

If I was to get gauges (just coz race car and looks) what ones would you get..? Need DIY :/


Sent from my iPhone using Tapatalk
 
I'm going to be putting power windows in my car hopefully this weekend maybe next and I do not have the wiring to plug it strait in. So I'll make a short diy to ad to the current one with how to do it without changing the dash loom. Just gotta work out which way the relay goes... one pin is constant one pin to ignition one to ground and one with power to switches. Just not sure what one is what.
 
crazywizard said:
I'm going to be putting power windows in my car hopefully this weekend maybe next and I do not have the wiring to plug it strait in. So I'll make a short diy to ad to the current one with how to do it without changing the dash loom. Just gotta work out which way the relay goes... one pin is constant one pin to ignition one to ground and one with power to switches. Just not sure what one is what.
Click to expand...

Will be keen on this
 
Having a DIY for the dash wiring for those who only get the door looms would be good as wreckers mostly don't like people ripping wires out the dash unless they buy the whole dash.
 
lancer1993 said:
Having a DIY for the dash wiring for those who only get the door looms would be good as wreckers mostly don't like people ripping wires out the dash unless they buy the whole dash.
Click to expand...

Not much point in that, would be a bigger pain in the ass than just doing a MR loom swap.
Doing a dash/interior loom swap DIY however maybe a the better option to get the same result. Your also not having chopped wires here and there either.

I'm not sure what wreckers you go to, but I've never heard of a wrecker saying you can only have the loom if you buy the whole dash. If they give you crap like that it's probably because it's a fiddly and time intensive thing they don't want to do.
 
I'm just saying when I did mine I just stripped out the wires I needed from the dash wiring loom, but that was for a CC and I wasn't looking at a dash swap. Much easier to just feed the wires through and tie them up out the way.

So a wiring guide would be good for some who can't get a dash loom or don't need one.
 
lancer1993 said:
I'm just saying when I did mine I just stripped out the wires I needed from the dash wiring loom, but that was for a CC and I wasn't looking at a dash swap. Much easier to just feed the wires through and tie them up out the way.

So a wiring guide would be good for some who can't get a dash loom or don't need one.
Click to expand...

http://www.ebay.com.au/itm/Mitsubishi-L ... 1235129352
Buy a bible, see the wiring diagrams :thumbup:
 
Bibles don't tell you how to do aftermarket/non-standard mods.

That's why.
 
Can we get a diy on how to organise items posted from other states. That may just be the best diy on here and then sticky it to the top of the forum page.
 
Maybe we need a DIY on how to do DIYs? ;)

rigby said:
Bibles don't tell you how to do aftermarket/non-standard mods.

That's why.
Click to expand...
Thank you, putting power windows into a CC is not covered by my Haynes manual, it has a wiring diagram for them but unless you're a sparky it's of little use.
A DIY would help wire them up the right way.
 
LaNcE said:
Anyone have a DIY clutch replacement?
Click to expand...


So has this been done?

I will be doing the clutch in my 4g15, 5 spd within a month and i really do need a guide hey.
I dont have the "bible".

If it has not be done, can some one please do it?
or even link a page all about it?

Thanks in advance.
 
KrashBandicoot said:
LaNcE said:
Anyone have a DIY clutch replacement?
Click to expand...


So has this been done?

I will be doing the clutch in my 4g15, 5 spd within a month and i really do need a guide hey.
I dont have the "bible".

If it has not be done, can some one please do it?
or even link a page all about it?

Thanks in advance.
Click to expand...

Here:

http://i68.photobucket.com/albums/i20/NoddyBlade/20140819_202121_zpsba47dc3b.jpg
http://i68.photobucket.com/albums/i20/NoddyBlade/20140819_202138_zps8bc99074.jpg
http://i68.photobucket.com/albums/i20/NoddyBlade/20140819_202152_zps2ad78e03.jpg
http://i68.photobucket.com/albums/i20/NoddyBlade/20140819_202236_zps4a76c1e7.jpg
http://i68.photobucket.com/albums/i20/NoddyBlade/20140819_202246_zps1daf6834.jpg
http://i68.photobucket.com/albums/i20/NoddyBlade/20140819_202256_zps1e85a939.jpg
 
Aftermarket? Get rails to suit the car, bolt them to the seat. Bolt them in the car Done.
 
Robzeh said:
DIY how to install aftermarket seats into the car , not sure if its been done cbf checking :/
Click to expand...
buy adapter plates to suit your car, then bolt adapter plates to the aftermarket seats rails, then bolt into car, takes all of 10 mins to do 2 seats
 
You must log in or register to reply here.
Back
Top