So I got bored tonight and took my wagon for a drive out to work to wash it, (I live in an apartment - no place to wash it underground, I also get weird looks when people park there car next to me and I have the door trim apart or something haha)
And I decided on my little list of this to do, most likely spread out over a fair while as I suffering from xmas over spending and Im working to make up for it
1. http://cgi.ebay.com/ebaymotors/Mitsubis ... 27b759eaa5
2. White LED SMD parkers/position light to match my license plate lights (they look so smart)
3. Black mesh behind the grill (def) and maybe mesh behind my bumper (depending on how it looks) opinions????
4. Replace front rotors with nice new shiny ones, preferably bigger ones depending on complexity of operations, (pads as well)
5. Paint front calipers white, and paint rear drums matte black (hide them, they are ugly), and ponder an rear disc brake setup, ideas?? I dont want to replace rotors from XYZ car and caliper from YZX car and then machine mounts from ZXY car, its a Mitsubishi not a Mitsu-bits-o-everything.
6. A simple CAI similar to viewtopic.php?f=23&t=140&start=30 but I'll probs leave the first pipe after the airbox on, just take off the u-bend bit and run the flex pipe from there.
Also whats the trick to get the black plastic liner out from under the wheel well?? It has these weird clips which I broke one trying to pull it off.
7. Decide on a tail light option, maybe http://cgi.ebay.com/SMOKED-TAIL-LIGHTS- ... 3360afc9a0 ????
8. Rig up some footwell LEDs for when the door opens.
9. Build car ramps to suit my lowered wagon for ease of access to the underneath from offcuts of steel profile from work
10. Fix my A/C vents on pass/side, the little on/off wheel has been pushed into the dash, how do I pull out the vent?
11. Wire up a Mono amp and small sub in the boot. Where have you guys ran your power cable through the firewall? I couldnt seem to find a hole. It was a bit dark tho.
12. Find a replacement front bar as the horizontal fins at the bottom have cracked at the vertical supports from when my cuz drove it through a steep gutter and it scraped. Anyone seen the same bar as already fitted?? I cant find anywhere.
13. Put my clear side indicators in when they arrive.
14. Apexi panel filter when it arrives.
And probs more or less depending on monetary values and spare time and workshop availability.
And I decided on my little list of this to do, most likely spread out over a fair while as I suffering from xmas over spending and Im working to make up for it
1. http://cgi.ebay.com/ebaymotors/Mitsubis ... 27b759eaa5
2. White LED SMD parkers/position light to match my license plate lights (they look so smart)
3. Black mesh behind the grill (def) and maybe mesh behind my bumper (depending on how it looks) opinions????
4. Replace front rotors with nice new shiny ones, preferably bigger ones depending on complexity of operations, (pads as well)
5. Paint front calipers white, and paint rear drums matte black (hide them, they are ugly), and ponder an rear disc brake setup, ideas?? I dont want to replace rotors from XYZ car and caliper from YZX car and then machine mounts from ZXY car, its a Mitsubishi not a Mitsu-bits-o-everything.
6. A simple CAI similar to viewtopic.php?f=23&t=140&start=30 but I'll probs leave the first pipe after the airbox on, just take off the u-bend bit and run the flex pipe from there.
Also whats the trick to get the black plastic liner out from under the wheel well?? It has these weird clips which I broke one trying to pull it off.
7. Decide on a tail light option, maybe http://cgi.ebay.com/SMOKED-TAIL-LIGHTS- ... 3360afc9a0 ????
8. Rig up some footwell LEDs for when the door opens.
9. Build car ramps to suit my lowered wagon for ease of access to the underneath from offcuts of steel profile from work
10. Fix my A/C vents on pass/side, the little on/off wheel has been pushed into the dash, how do I pull out the vent?
11. Wire up a Mono amp and small sub in the boot. Where have you guys ran your power cable through the firewall? I couldnt seem to find a hole. It was a bit dark tho.
12. Find a replacement front bar as the horizontal fins at the bottom have cracked at the vertical supports from when my cuz drove it through a steep gutter and it scraped. Anyone seen the same bar as already fitted?? I cant find anywhere.
13. Put my clear side indicators in when they arrive.
14. Apexi panel filter when it arrives.
And probs more or less depending on monetary values and spare time and workshop availability.