Did you do it skippy? Keen too see results almost ten yrs later.. @Magnats I might be able to recruit Mike to do it for me
@Ian yeah I'll let you know when I get going on it!
Did you do it skippy? Keen too see results almost ten yrs later.. ♀
Glad to see someone actually did thisCan confirm, CG onto CH fits! You need the boot lid, bumper, lights and parts of the loom (indicator plugs and rewire plate lights), otherwise a direct swap.
From memory the cg lights were different shape at the bottom or inner sides.How much difference is there between the cg and ch tail lights?
It's just a different boot and bumper they just bolt on, nothing needs to be cut or welded, cg and ch Lancers are the same carDid you do it skippy? Keen too see results almost ten yrs later..
Lights are slightly different as is the harness, but if you throw the CG lights in and are handy with wiring it shouldn't take more than an hour to swap it all over and wire it up.It's just a different boot and bumper they just bolt on, nothing needs to be cut or welded, cg and ch Lancers are the same car
Yes I know, but the over all body is exactly the sameLights are slightly different as is the harness, but if you throw the CG lights in and are handy with wiring it shouldn't take more than an hour to swap it all over and wire it up.