there are a few more parts that you need and need to modify.
you need to modify a 4G93 cam shaft cylinder to the same length as a 4G69
also need to get a 4G64 or 4G63 crank sensor wheel
4G93 crank shaft sensor
4G93 cam sensor
you can use a 4G93 engine mount but you can turn it upside down but you can only use 2 bolt hole to secure or a evo 8 engine mount but you need to shave 1" off
use the 4G93 gearbox mount
modify the 4G93 injector harness so it has 4 individual packs or reduce the coil packs on the 69 engine from 4 to 2 easier to do the first
you can use the evo intake manifold but it will need modding to fit correctly
evo 7,8 or 9 fuel rail - this will bolt up directly to a 4G69 manifold
and pretty much any size t/b will bolt on just need to make sure that you get one that fits up the TPS look for the evo 4,5 or 6
other extras to get could be adjustable cam gear, under crank pulley, rising fuel pressure reg,
all of this should give you approx 170hpatw
get a MSD RPM modual to actiuvate the MIVEC
reflash a pre 2001 ecu