what ce parts will fit a cc lancer?

lancerguy

New Member
Just wondering if someone knows what interior parts from a ce lancer will in to a cc lancer if anyone can make a list that would be great

thanks,
 
MR kit might fit... since the mirage asti has an MR kit on CC's, but I dunno anyone who has tried to line them up before
 
I had an mr kit for mine I know the rear fits but the side skirts are a really tuff fit you will have to heat up one of the ends so you can fit it around the wheel arch but its ever so slightly and the doors line up. The reason I didnt do it is because you have to drill holes in the body of the car so it clips in
 
lancerguy said:
you have to drill holes in the body of the car so it clips in

That's standard for any bodykit, OEM or aftermarket
 
Only need holes at the end of each skirt. One bolt/screw at each end of the skirt. Seal the rest of the skirt with sikaflex
 
Depends on the skirts, mine is drilled in wheel arches and under the car, sikaflex on top
 
My side skirts has rivets along the door sills and at both ends, makes it a *mum* to take off if I even need to remove the front fenders.

BTW the CE wheels will fit on the CC :)
 
will a ce efi htrottle body fit a cc?
and exhaust manifold?

i bought a turbo charged ce engine with all these part, what can put it in my cc?
Throttle body / injectors
Starter motor,
Alternator,
Leads & Distributor,
Turbo manifold, with T2 flange / Turbo charger,
Intercooler with all piping,
Evo 6 ecu and after market piggy back ECU,
Hks blow off valve,
38mm wastegate
Full sports exhaust system & Stainless steel cannon,
Sump with oil return.
 
Assuming both are 4g93, see below. If both 4g15, no farking idea but I wouldn't bet on any of it fitting apart from being able to use some of the exhaust

will a ce efi htrottle body fit a cc? no
and exhaust manifold? yes but the flex pipe won't clear the sump usually since they run down the car on different sides slightly. exhaust manifold itself will fit.
i bought a turbo charged ce engine with all these part, what can put it in my cc?
Throttle body / injectors injectors only
Starter motor, dunno
Alternator, dunno
Leads & Distributor, if there are no coil packs, yes
Turbo manifold, with T2 flange / Turbo charger, yes but you'll need to turn the turbo around
Intercooler with all piping, yes
Evo 6 ecu and after market piggy back ECU, unsure
Hks blow off valve, yes
38mm wastegate yes
Full sports exhaust system & Stainless steel cannon, as above, can be used but it's not an exact fit since they fun don't different sides of the car slightly
Sump with oil return. not sure, but if yes then the rest of the exhaust will be easier to bolt on
 
Back
Top