Tools

[Black_rims]

Hi all
Just windering if anyone knows what tool sizes would be good to keep in the car as a kit.
What are the general bolt sizes and such.
Thanks

 

[donki]

You've posted in the CJ/CF Forum, so i'd presume you have a later model, which shouldn't need anything except a phone number to call for warranty when something goes wrong.

The standard tool kit is usually enough, for anything else a flatblade and crosshead screwdriver, and a basic set of 8mm-17mm spanners will be more than enough.

 

[Black_rims]

You've posted in the CJ/CF Forum, so i'd presume you have a later model, which shouldn't need anything except a phone number to call for warranty when something goes wrong.

The standard tool kit is usually enough, for anything else a flatblade and crosshead screwdriver, and a basic set of 8mm-17mm spanners will be more than enough.

Yep 2016 CF

Little things easier just quickly do it then try warranty which takes an eternity to get done

 

[rigby]

Most bolts are 8-14mm, plus screwdrivers, pliers and zip ties should be all you need

 

[Hugh-CE]

Agreed with the above, make sure your tyre iron fits your wheel nuts if you've changed them too. I have to carry a breaker bar and a 17mm deep socket.

 

[Black_rims]

thanks for all the replies
ended up just putting coule of screwdrivers/pliers and spanner roll.
i already had a 800mm breaker bar and 19mm magwheel impact socket in the boot. i have aftermarket wheels