Evo Camber Bolts

S

Spetz

Well-Known Member
Hi guys,

Someone recently told me that Evos run camber bolts on the front.
From reading the Evo forums it seems that the bolt can just be fitted 2 different weighs, one will give -1 degree camber and the other way will give -2 degrees camber.

Does anyone know whether these fit the CE strut/knuckle setup?

And has anyone used aftermarket camber bolts on a track with success? I hear these lose their adjustment etc
 
You can just elongate the holes in the struts slightly to achieve the camber your after and still use the proper size bolts. I've done this for a track car and lots of road cars with no dramas. Adjustment is a bit tricky but a decent wheel alignment place shouldn't have a problem.
 
Yup, same thing that holds the rest of the car together, tight bolts.

BC racing coils come with an oval top hole for this reason
 
You must log in or register to reply here.
Back
Top