DR1FT
New Member
ive had too repeat myself god knows how many times so here it is
me and devi8 AKA dale put the full MR interior into a GLI and it wasnt exactly fun...
you will need:
full MR interior - all trims, doors ( so you can have the power windows + mirrors ) and the interior loom
1. pull everything out. every panel you want out, including dash ( its easy, just do every screw and bolt you find ) and take out the seats + doors + carpet
2. you will find that there is allot of wiring, and ofcourse. undo every plug ( remember where the plugs go)
also the ignition, you will need a gregory's manual for this, you will also be taking off the indicator/window wipers switches off the steering colum
you will be needing to do so since the MR loom has the extra wires for the doors electronics
it should look like this ( loom being hold by devi8 :lol: )
3. do the same too the MR, if you have it seperate then skip
4. plug in every plug from the MR loom into your gli. pretty much do the oppisite too what you did taking it out :lol:
5. put on your MR doors and just plug them into the loom.
6. put all your interior back in. test if everything works
for some help here's some pictures
devi8 and myself are not responsible for what you do too your own vehicle. do so with caution because this is not a walk in the park
me and devi8 AKA dale put the full MR interior into a GLI and it wasnt exactly fun...
you will need:
full MR interior - all trims, doors ( so you can have the power windows + mirrors ) and the interior loom
1. pull everything out. every panel you want out, including dash ( its easy, just do every screw and bolt you find ) and take out the seats + doors + carpet
2. you will find that there is allot of wiring, and ofcourse. undo every plug ( remember where the plugs go)
also the ignition, you will need a gregory's manual for this, you will also be taking off the indicator/window wipers switches off the steering colum
you will be needing to do so since the MR loom has the extra wires for the doors electronics
it should look like this ( loom being hold by devi8 :lol: )
3. do the same too the MR, if you have it seperate then skip
4. plug in every plug from the MR loom into your gli. pretty much do the oppisite too what you did taking it out :lol:
5. put on your MR doors and just plug them into the loom.
6. put all your interior back in. test if everything works
for some help here's some pictures
devi8 and myself are not responsible for what you do too your own vehicle. do so with caution because this is not a walk in the park