VIC: turbo setup might interest some guys

that actually looks pretty cool (from a nub perspective)
shame its melb, now that i have a stable newish engine, id love to do something like this with mine
 
BI65ND said:
That's what couriers are for ;)
Click to expand...
even if i got it, it be there for 2 days staring at it trying to figure out how everything worked :p
(i need to read more into turoz)
 
you could still get it and just let it sit there while you read up on it. its a great diy install from the looks of it then go get it tuned :p
 
So u get turbs,manifold,dump.

Some one get it so people can start to see how much going turbo costs....
 
im sure theres quite a bit more cost involved but i would also be interested to see how much going turbo costs.
 
That's amit's turbo kit, he ran it on his 4g93 sohc mirage. I think it was pulling some good numbers.
 
Another 1 k or 2. Unless u have or can find a cheap piggy back with tune on it already.

Fmic
Injectors maybe
probably should run 5 psi no more.
Headgasket
Exhaust
Bov
Fuel pump
Modplate it.

Then when u want more boost forgies
 
You need an ecu option that will support the additional boost mapping it a standalone ecu.

You can run more than 5osi that's for sure.

I can complete the setup.
You would need 390 or 450 cc injectors min. And run a standalone ecu.
The lancer 1.8 turbo I built from scratch runs smooth as and is bulletproof. Need to swap out the wastegate actuator but been running for months and driven hard with boost touching 12psi. No need to swap headgasket or run a bov for that matter.

Custom Turbo back or dump pipe back exhaust with high flow cat.
Custom fmic setup
Standalone ecu installed and tuned.
Budget for 3500 for that
 
If that setup is also not Ac friendly and u got and want to keep Ac then the important part is not very useful.
I've made Ac friendly turbo kits for both 4g93 and 4g15.
Both running t28 and gt2560r turbos. We using 3 inch inlet adapter too and clears the clutch slave no problem with good room between the radiator for a larger turbo if that's the goal.
 
Hens said:
Budget for 3500 for that
Click to expand...
I'm happy your on here for times like this.


12psi on stock pistons and headgasket :| ? I've never pulled apart a SOHC motor what sort of gasket is it metal? How do you go about compression.


Also shows my car is cheap at 4k!! :clap:
 
Yeah gaz your car is very fair. Don't forget oil and waterlines kiddies. That kit is very Bare minimum like I started with. I'd buy a complete kit if I was to do it again
 
You must log in or register to reply here.
Back
Top