that actually looks pretty cool (from a nub perspective)
shame its melb, now that i have a stable newish engine, id love to do something like this with mine
You need an ecu option that will support the additional boost mapping it a standalone ecu.
You can run more than 5osi that's for sure.
I can complete the setup.
You would need 390 or 450 cc injectors min. And run a standalone ecu.
The lancer 1.8 turbo I built from scratch runs smooth as and is bulletproof. Need to swap out the wastegate actuator but been running for months and driven hard with boost touching 12psi. No need to swap headgasket or run a bov for that matter.
Custom Turbo back or dump pipe back exhaust with high flow cat.
Custom fmic setup
Standalone ecu installed and tuned.
Budget for 3500 for that
If that setup is also not Ac friendly and u got and want to keep Ac then the important part is not very useful.
I've made Ac friendly turbo kits for both 4g93 and 4g15.
Both running t28 and gt2560r turbos. We using 3 inch inlet adapter too and clears the clutch slave no problem with good room between the radiator for a larger turbo if that's the goal.
Yeah gaz your car is very fair. Don't forget oil and waterlines kiddies. That kit is very Bare minimum like I started with. I'd buy a complete kit if I was to do it again