looking for PCD of CH mivec 4 stud

magnats

magnats

Member
hi
looking for some one that would know(be able to measure) the pcd of a mivec ch lancer with disc brakes on the back (4 stud not 5).

just trying to confirm my information.
 
ok thanks
do you know of any ch that came out with 4x100 with disc on the back.
if not i may need to look into redrill of hub to suit.
 
yeah looking at rear disk on cg vrx and ch is the closest model that would come close parts wise.
 
all vrx's are 5x114, mivec base were 4x114 then all went 5x114. only 4x100 are 03-05 ES models with discs only on front.
 
*sighs* Yes to be correct, but imma tired and cbf being correct :lol:

In short. VRX trailing arm would be the way to go, though you'll need to upgrade to 5stud on the back... unless you found a 4x114.3 stud pattern. But since all the models that came out with rear discs (in the CH era) were 5x114.3 then you'll need to go hunting satria's and gsr's
 
I've got rear disks and I'm running 4x114.3 on my ch. So you wouldn't necessarily need the vrx arms. Could use later model es
 
i wonder if i would be able to use the ch setup but use a cg hub and 4x100 rotors (if i can find them or redrill ch ones).
i think i need to get more info and a better look at a ch setup. work shop manual don't give enough info on the rear setup much.
 
You must log in or register to reply here.
Back
Top