Hey been on and off the forums a fair bit but on the Facebook page, quite active there. You might know me as Billy Chen with the pedobear display picture.
I have been into my Nissan's for a long time, decided to get a basic mirage as a daily.
We know how this story ends, buy daily, modify daily, too modified, need new daily.
but a quick run down of my car.
started off life as a boring red mirage 1.5l which what i can tell was owned by a old person, car was immaculate inside with just faded paint. everything from the carpet to the rear plastics where perfect, this didn't last very long.
just to list a few of my mods
- 5 stud conversion and 18" wheels from a CJ VRX, followed by sway bar, aftermarket arms etc.
- VRX rear plastics from a mirage
- CE3 dash/door trims
- power mirror and windows
- full deadened roof, floor and doors, rear quarters and boot floor will be next when i get more time.
- map light and sunglasses holder from a 350z
- 4g69 conversion using the full loom from the CS lancer (both engine bay and dash loom)
off the top of my head that's what i have done so far, i'm sure i have left a few things out.
i do look forward to being more active at events so i'm aiming to attend the EOYM for a few days but i do have a 2 page to-do list and half of those things will need to be done before i can cross the boarder.
im not really a photo person so dont have many photos. but these are a few of the things i have done.
I have been into my Nissan's for a long time, decided to get a basic mirage as a daily.
We know how this story ends, buy daily, modify daily, too modified, need new daily.
but a quick run down of my car.
started off life as a boring red mirage 1.5l which what i can tell was owned by a old person, car was immaculate inside with just faded paint. everything from the carpet to the rear plastics where perfect, this didn't last very long.
just to list a few of my mods
- 5 stud conversion and 18" wheels from a CJ VRX, followed by sway bar, aftermarket arms etc.
- VRX rear plastics from a mirage
- CE3 dash/door trims
- power mirror and windows
- full deadened roof, floor and doors, rear quarters and boot floor will be next when i get more time.
- map light and sunglasses holder from a 350z
- 4g69 conversion using the full loom from the CS lancer (both engine bay and dash loom)
off the top of my head that's what i have done so far, i'm sure i have left a few things out.
i do look forward to being more active at events so i'm aiming to attend the EOYM for a few days but i do have a 2 page to-do list and half of those things will need to be done before i can cross the boarder.
im not really a photo person so dont have many photos. but these are a few of the things i have done.
Attachments
-
23555502_10155938453062458_1761238792_o.jpg1.4 MB · Views: 25
-
23555506_10155938452717458_312341786_o.jpg493 KB · Views: 24
-
23558061_10155938452027458_192526061_o.jpg536.4 KB · Views: 23
-
23584356_10155938453827458_895142841_o.jpg806.5 KB · Views: 22
-
23555455_10155938452212458_1639515293_o.jpg310.4 KB · Views: 22
-
23584179_10155938453322458_355798116_o.jpg365.5 KB · Views: 23
-
23600014_10155938454252458_1916398960_o.jpg613 KB · Views: 25
-
23557849_10155938453272458_2107691919_o.jpg1.1 MB · Views: 25
-
23557833_10155938453557458_1739198559_o.jpg854.9 KB · Views: 25