Correct Boss Kit for CC's

rigby

Well-Known Member
State Event Organiser
MODS PLEASE STICKY THIS!!

So you want to buy an aftermarket steering wheel for your CC Lancer? Think again. There are two types of boss kits that will fit CC's and it depends on the style of steering wheel you have.

Type 1: Your grounding stalk is to the bottom of the centre of the steering column when you take your wheel off. You will need to buy a regular CC Lancer boss kit. Your indicator assembly would look like this from behind:

20140304_184019_zpse6c0baab.jpg

1994_Mitsubishi_Lancer_Glxi_Cc_8164286.jpg


Type 2: Your grounding stalk is to the top right and further away from the centre of the steering column when you take your wheel off. You will need to buy a CE or FTO boss kit. Looks like this:

20140304_132410_zps17e975a4.jpg

20130516_122121_zpsce079036.jpg


Alternatively you can also just fit any factory FTO or CE chassis steering wheel with no boss kit. I have an FTO wheel in my CC.
 
Last edited:

LIAM

Member
Rigby good info but I can tell the difference by just looking at the different stalk thingos :)
 

leadfoot

Active Member
also rigby both have the grounding stalk to the right it just ce style has it up top cc down botom you image of a cc ctalk assembly is a photo of the back no the front as you would see it after taking your wheel off
 

Trondabron

Administrator
Forum Administrator
leadfoot said:
also rigby both have the grounding stalk to the right it just ce style has it up top cc down botom you image of a cc ctalk assembly is a photo of the back no the front as you would see it after taking your wheel off

That is barely english.
 
Top