im listening.... this is 4g15 ecu or 4g93 installed currently?
For both, as both had the mh7203FA chip, but the tuning is specifically for 4g93/4g63
im listening.... this is 4g15 ecu or 4g93 installed currently?
I flashed ceddymods evo6 rom onto my plastic case ecu with success i tested some features and they worked gotta get someone to tune it
ignition not working will still read lean as air is just being pumped though the motor. o2 sensor can't measure raw fuel just o2 which there will be heaps of.Thanks for reminding me!
I've also flashed ceddy onto a plastic case ecu, but i couldnt get the car to start up. Wideband shows full lean, so i suspect fuel isnt being injected
ignition not working will still read lean as air is just being pumped though the motor. o2 sensor can't measure raw fuel just o2 which there will be heaps of.
I used the 25570100-mod-1v20b-maf rom and had to change the mem model from the F to FA in the xml flashed first go car started and drove but my wideband was going into the 10s when just trying to accelerate
I didnt think the 4g93 has a knock sensor installed?The cel will be from the knock sensor settings not being right for the knock sensor installed currently working on getting it dialed in as mine has over 9counts between 2200-2700 and afrs are good and on very conservative timing