EOI: Bodykit swap/sell

Status
Not open for further replies.
S

Spetz

Well-Known Member
Hi guys,

I have a GFX Titan I bodykit on my car and I am toying with the idea of putting an MR kit on it. The kit is extremely rare and I had it shipped from a company in Perth which closed down.

Is there anyone who is willing to either buy my bodykit, or trade it for their MR kit?
The MR kit must be the pre-facelift version (ie, not the round foglight version)

I don't have many pictures at the moment. This is my intro thread where there are one or two:
viewtopic.php?f=4&t=1553

EDIT: Pics

Note the front bar is hanging loosely, not bolted as it should.
LancerSide.jpg


Fender (thought I think this can be adjusted to sit flush with the fender):
DSC00039.jpg
 
i have the 2000 model ce 2 coupe mr, fog lights in front bar are not the round ones. i live on the sunshine coast qld. colour is white. condition of all panels are perfect. would be nice to see a pic of the front bar on your vehicle.
 
There is a pic in the linked thread:
DSC00670.jpg


My car is in Canberra, and I will not be in Australia until September.
Are you willing to wait 2 months?
 
its a nice front bar/bodykit, they arent made anymore correct?

plus the spotlights in the lip of the bar look awesome too
 
coul;d you post up some better pics of this body kit ? would be nice to see a rear shot plus a couple of different front angle shots of the front area. what i see at present regarding the front is it appears to look abit wide compared to guard . side skirts look fine. thanks.
 
I will have a look for pictures but to be honest I doubt I have any, and if I do they will be bad pictures (from a phone, bad light condition, filthy car etc).

As for the front bar being wider, the sides of it protrude at most about 5mm from the fender.
 
Spetz said:
I will have a look for pictures but to be honest I doubt I have any, and if I do they will be bad pictures (from a phone, bad light condition, filthy car etc).

As for the front bar being wider, the sides of it protrude at most about 5mm from the fender.
Click to expand...

Get a camera out and take more pictures?? I want to see this kit too!
 
I'm not in Australia to take pics which is the problem.

I found some phone camera pictures but the car is filthy and the front bar is not on properly (it was taken off at the time to get it onto a car trailer and never put back properly as it hasn't been driven since then... 4 years ago...)
Also the rear is not a complete bar, just pods on each side.
And yes, the kit hasn't been in production since about 2003 or so, and was shipped from the manufacturer in Perth, WA.

I will edit the first post with some pics I found unfortunately though the quality of the pics, color of the car and amateur photographing doesn't do justice to the body kit.
 
If you aren't in Australia not sure exactly why you are EOI'ing this stuff. Thread closed.

Should you suddenly come back into Australia and not using a overseas IP then I will reconsider opening the thread.
 
Status
Not open for further replies.
Back
Top