Will CE front CV shafts fit a CC 4G93?

you should be able to retain the shaft itself and just change the bearings and cups. it's not a hard job where you located i think i've got a spare cc passenger side shaft that i personally wont need anymore now that i'm running gsr shafts
 
leadfoot said:
you should be able to retain the shaft itself and just change the bearings and cups. it's not a hard job where you located i think i've got a spare cc passenger side shaft that i personally wont need anymore now that i'm running gsr shafts
Click to expand...

I'm in Brisbane, Forest Lake.

I was told you had to wreck the bearing to get them off.
 
LOL thats bullshit theres a circlip on the end of the shaft thats splined remove the circlip and you can remove the tri bearing yolk. it's about a 15 min job to change the cv cups on the shaft.
 
leadfoot said:
you should be able to retain the shaft itself and just change the bearings and cups.
Click to expand...

Actually, it's the shaft that's the problem, it's bent. Everything else on the shaft is ok.
 
i'm on the gold coast. i'll have to double check to make sure we didn't change it with my little brothers when he hit a gutter. and to make sure it's straight if its good say 60$
 
im not sure about CV shafts, but I do know from experience that a CE steering rack will fit a CC lancer, my blue cc coupe currently has a rack out of a CE rage in it, and honestly it works better then what the cc one did haha, steering is more responsive and its smoother and easier to turn(I have a 1.5 with no p/s haha)
 
You must log in or register to reply here.
Back
Top