VRX Hubs

[Rossmckay]

This is almost certainly an eye-roll inducing question but here goes.

Is it possible to remove the hubs off a VRX wrecker and fit them to my ES?

 

[SDate42]

For the fronts - remove brake disc and caliper, undo the, tie rod nut, the lower control arm nut and then the strut bolts.

For the rear - remove the whole trailing arm. So remove the brake disc and pads, handbrake cables, then the bolts from the 3 arms, the lower strut bolt and then the main bolt in the trailing arm. Take the sway bar too if you don’t have one.

 

[Rossmckay]

TYVM