Ok we'll when I start it I let is warm up. After that when I give it the slightest bit of power in the smoothest way then slowly let the power of it just dies I don't know what's wrong with it need it solved what could it be
Hi
long shot but as its a carby model have you checked the anti dieseling solenoid on the carby isnt sticking ect...also have you done a compression check which I suggested in your carby thread
Finally pull the hose off that runs from the top of the float bowl along the firewall to the charcoal canister, any wet fuel in there? if so the float might be sticking and flooding the carb
yeah that looks like it.... the hose go's to a small vacuum tingamejig on the firewall then off to the canister
the solenoid is the only thing on the carb thats electrical (well on mine anyways) it stops "run on/dieseling " when the engine switched off, its basically a small solenoid controlled pin that moves in or out to shut of air or fuel for the idle circuit