K&N AIR FILTER 33-2074 fit on ce lancer?

Viikfacee

Viikfacee

New Member
Would the K&N AIR FILTER 33-2074 fit on lancer ce?
i tried ask the ebay seller they wasnt much of a help ==
 
*sigh* do u have common sense?
im pretty sure no-one on here knows part numbers off the top of their head zzz..

as far as i can remember its either a 2.5" or a 3" diameter pod to make it fit on ce's

TBH you could always check the diameter of ur intake pipe which will end up being the same size diameter u need the pod, and u also need a short bit of aluminum pipe to clamp both pipes onto or a maf adaptor but whatever...
you should do some legwork of your own, ei- measuring, going down to supercheap or auto barn and asking which pod will fit ur car, then measure that pods size and get the part number whaterver


sorry to be so rude, but if u had done some research you could have found out if it fitted before anyone replied to this thread

and it would be helpful to have a link to the ebay page... jus sayin'
 
see what i mean, lack of info, and if it is a pannel filter then they are piss easy to find info on them and if they fit... *shakes head*

i could find one in like 1 sec on ebay that would fit
boom apexi, non oiled version has better flow rates than an oiled k&n, u dont need the oil for a pannel filter TBH
http://cgi.ebay.com.au/APEXi-Panel-Filt ... 588a5d559e

and look what else i found in like a second after googling
this is the k&n replacment filter part number not the one u have seen, go look for that... 33-2105
 
Look. Im sorry for causing you the trouble. Im not expert of looking up car parts.
i'm new to cars.. please give me some slack ..

resuliac said:
*sigh* do u have common sense?
im pretty sure no-one on here knows part numbers off the top of their head zzz..

as far as i can remember its either a 2.5" or a 3" diameter pod to make it fit on ce's

TBH you could always check the diameter of ur intake pipe which will end up being the same size diameter u need the pod, and u also need a short bit of aluminum pipe to clamp both pipes onto or a maf adaptor but whatever...
you should do some legwork of your own, ei- measuring, going down to supercheap or auto barn and asking which pod will fit ur car, then measure that pods size and get the part number whaterver


sorry to be so rude, but if u had done some research you could have found out if it fitted before anyone replied to this thread

and it would be helpful to have a link to the ebay page... jus sayin'
Click to expand...

Sorry i wasn't talking about pod filters.. i think it panel stock filter?
mdclear said:
not even sure he is talking pod filters
Click to expand...

Thank for the info.. sorry i caused such a drama..
resuliac said:
see what i mean, lack of info, and if it is a pannel filter then they are piss easy to find info on them and if they fit... *shakes head*

i could find one in like 1 sec on ebay that would fit
boom apexi, non oiled version has better flow rates than an oiled k&n, u dont need the oil for a pannel filter TBH
http://cgi.ebay.com.au/APEXi-Panel-Filt ... 588a5d559e

and look what else i found in like a second after googling
this is the k&n replacment filter part number not the one u have seen, go look for that... 33-2105
Click to expand...
 
I replaced a Ryco A1273 with a K&N 33-2074 In a 2003 CE2 Lancer Wagon - exact fit. So if you use a A1273 it will be OK.
 
Viikfacee said:
That also much a helpful as well when i change my oil ! :D
thanks
Click to expand...

Huh?
Ryco make air filters too you know, not only K&N. :roll:
May i ask why pod? What setup do you have?
 
oh yeah.. i forgot about that.. LOL mybad.. i dont use pod.. i want to but i just cbb changing it too much a affoid and rather go panel! easier
 
Viikfacee said:
oh yeah.. i forgot about that.. LOL mybad.. i dont use pod.. i want to but i just cbb changing it too much a affoid and rather go panel! easier
Click to expand...

Wait i must of miss-read. You're using a panel filter correct?
Good choice.
 
You must log in or register to reply here.
Back
Top