Help with my 4g93t Jumbuck

fado5

New Member
Hey all.

So I'm in the middle of converting my Proton Jumbuck to a 4g93t.

I have pulled the 4g15p, swapped the box over to the new block and dropped her into the buck.

Wiring loom is in and I'm hitting a few bumps along the way that I'm hoping someone can help me with.

There will be a few questions but first out of the gates is can anyone tell me or point me in the direction of a vacuum hose map of what goes where?
I have my brake booster hose onto the large port to the right of the throttle body on the back.
I have no idea where any of the P.E.A hoses go or the 2 ports at the front lower part of the intake manifold.
I'm hoping someone can take a look for me and draw a quick mud map or type up a point to point. Ive been searching and searching but can't find anything that doesn't reference coloured hoses which I obviously don't have!
 
cant help ya directly,

but might be worth searching / signing up to 4gtuner.com its more dedicated to evo1-3's and gsr's. Might have some more indepth info.
 
If you go to my thread in CC members rides and have the photobucket extension to see dead photos, I may have something in there that's helpful? Did a 4g93p swap and pretty sure I had plenty of engine pics. Don't remember specifically though, this was in like 2015
 
If you go to my thread in CC members rides and have the photobucket extension to see dead photos, I may have something in there that's helpful? Did a 4g93p swap and pretty sure I had plenty of engine pics. Don't remember specifically though, this was in like 2015
I just looked over pages and pages of posts but none jumped out at me that looked like a 4g93p swap.. what is the thread called?
 
Back
Top