Door key barrel replacement

LinkinParkWRC

New Member
Ok i've had a search but I'm unable to find the answers Ineed. So long story short. My only key for my mirage got ran over by a lawn mower.

As i have another mirage (wreck) how do i remove the drivers and passenger door key barrels to replace them with the ones off the wrecked mirage?

I will also be replacing the ignition barrell, ecu etc.. aswell. I've already done the boot's key barrel so i can at least lock the car but its a pain in the neck to climb over the roll cage everytime just to unlock the door the drivers door.

At the moment i can still drive it as long as i have the mangled key head with about 2 cm of key attached in the key barrel and turn the iginition switch manually.

Any help will be much appreciated.
 
Whined the window up and take the door trim off. I find it easier to take the whole door handle out.
There is 2 push rods you will need to un-clip, one for the lock and the other for the handle.
There is 2 x Phillips head screws or 2 x 10mm bolts holding the handle on, remove the door handle from the door.
There is a clip holding the lock in the door handle, remove the clip and remove the lock.
Put the new lock in and reverse the whole possess.
Or you could just change over the whole door handle.
 
Back
Top