Correct CH Tiptronic Auto Fluid?

Radical_Ralliart

Radical_Ralliart

Active Member
Hey everyone, asking the question because i don’t know a great deal about these mitsubishi auto transmissions.

I’m going to help a friend service his ‘06 Lancer’s transmission, he’s got a 2.4L 4g69 mated to a Tiptronic 4-speed transmission.

Whats the go-to brand and oil type that works well with these transmissions?

Anyone got some tips and tricks to servicing them as well?
 
ATF FS auto fluid from penrite. Check with your rego number on the penrite lube guide to make sure please.
Drain and refill with the correct amount and check on the dipstick before and after warm up. The fluid will grow in level once up to temp.
Always easy to add more than take it out. Use a good clean rag to check the dipstick.
 
Sweet i’ll grab that penrite fluid soon, i’m also installing a PWR transmission cooler at the owners request, i’ve fitted one to a 380 before so it shouldn’t be much different this time
 
Yes i will be keeping the radiator section as part of the cooling loop, i’m going to be helping him modify this CH lancer a bit so my aim is to keep it reliable but upgrade things where i can
 
I like the tridon efi clamps with the smooth interior for less cutting of the hoses. The correct size is very important though. Have used hundred's of these over the years and rate them the best. Can you put a photo up of them I can't link them.
 
What I don't like about the norma clamps is how stiff they are. They don't follow the shape of the hose as nicely. The norma clamps will do the job though. Everyone has an opinion.
 
You must log in or register to reply here.
Back
Top