So I have done my swap and found it wasn't turning on. The culprit was the section under using the FTO loom:
Switched ignition
Join the blue-black wire (car side) to the blue-red wire (CC side)
Its actually blue-red both sides and only made the connection to it when i red the evo loom section which says the car side is blue-red.
Switched ignition
Join the blue-black wire (car side) to the blue-red wire (CC side)
Its actually blue-red both sides and only made the connection to it when i red the evo loom section which says the car side is blue-red.