can i put Ce parts in a CC

What parts? Need to be more specific. Some will fit, some wont
 
ConscriptComb74 said:
then engine and manual gearbox everything engine envolved

The CC engines are diff orientation to the once in a CE
as for gear box... i doubt it too
 
Can be done but it's more trouble than its worth. Everything's reversed from cc to ce in those regards. Have a look under the hood of each to see the differences. Also is your cc a 1.5 or 1.8? Because a mirage is a 1.5L fuel injected engine, whereas the cc came in 1.5 carby or 1.8 injected
 
No the CE engine will not fit unless u drill out all the engine mounts in the engine bay, and custom fit it in the CC bay, then you will need to get the wiring all done, then you will need to get an engineering cert for all the cut n shutting performed

Entire costs would reach around the 10k mark

Why do you want to do a CE engine swap anyway??

If you want a good engine setup that will fit, look for a Proton M21 wreck, you can fit everything from that into your CC, including the fuel tank/efi setup, 1.8 DOHC engine interior etc
 
Or look on pickles for cc wreck with 1.8 sohc. less power than proton but easier to come by and u can get a whole wreck for 3-500.
 
I thought this would be related so sorry for hi jacking, would ce spring fit in a cc? particularly after market lowered ones? cheers
 
Yes, CE rear shocks n springs will fit in a CC, fronts will also fit but will need to use the CC tophats
 
CE wagon engines have the same orientation as CC lancers ( gearbox to driver side ) I believe they would bolt up ok but I do not know about the wiring .
 
i have a 1.8l gearbox (i beleive. and could probably help with installing a 1.8 if you want to avoid haing to change the fuel tank and install high pressure lines run an external electric fuel pump somwhere in the engine bay then you only have to worry about those lines
 
Wont fit, guards, bonnet, radiator support etc are all different and need to be cut/replaced and even welded together
 
jdmstyling said:
EVL20T said:
Wont fit, guards, bonnet, radiator support etc are all different and need to be cut/replaced and even welded together

Have you tried before?

Lol, have a look through mikeys ride thread and some of the cars he's built. If he says it doesn't fit, it doesn't fit. Not to mention he said exactly why it won't fit.
 
Back
Top