4g93 Engine removal

C

charlie

New Member
So pulling the 4g93 (1.8L) out of my 2000 CE lancer
I've done RWD but never a FWD and wondering what do i do about the drive shafts, do i have to completely remove them from hub and gear box or can i just flick them out of the gear box and leave them attached to the hubs?

Thanks for any info.
 
charlie said:
So pulling the 4g93 (1.8L) out of my 2000 CE lancer
I've done RWD but never a FWD and wondering what do i do about the drive shafts, do i have to completely remove them from hub and gear box or can i just flick them out of the gear box and leave them attached to the hubs?

Thanks for any info.
Click to expand...
remove from either the hubs, or remove from the gearbox.


I like to remove from the hubs cause its a little easier once you unbolt the strut tower
 
Most people will unbolt from the hub. 32mm socket required. You can keep the gearbox shaft attached to the engine as you pull it out
 
You must log in or register to reply here.
Back
Top