help

  1. E

    second hand speedo not working

    brand new to the site and looking for help with my 99 glxi sedan that came with a cluster that had no tacho, just a speedo with fuel level and temp. the cars manual so wanted a different cluster with a tacho but after taking the old one out and plugging the new one in, it doesn't respond at all...
  2. M

    CJ 2015 trim upgrade

    Hey all, Wanting to make my 2015 Lancer look nicer, is there any trim from higher models, both exterior and interior, that fits right onto the 2015 CJ model? See the picture of my lancer below, just want to personalise it more and make it less basic without spending hundreds on aftermarket...
  3. T

    Just brought a ce wagon..

    So, I know pretty well nothing about cars yet just to be clear at the beginning. Just brought a 1999 lancer ce wagon.. how would I go about finding parts to fit the car? Like a cat back exhaust or putting extractors on? How will I know if they will fit the car? Are parts from different lancers...
  4. B

    Lose ignition when throttle is 80%+

    Alright so this is my first time posting here but I looked back through a lot of threads to see if I could find anyone with the same or similar enough problem, to no avail. My Car & Problem: I have a 2002 Lancer CE, 1.8L GLi (215k klm) that I bought about 7-8 months ago. Cleaned it up got it...
  5. W

    07 4g69 torque specs for pressure plate to flywheel?

    Hi all. I am replacing the clutch in my 07 2.4l lancer. Messaged the seller of the clutch asking if it comes with a torque spec sheet and they said no but it’s similar to OEM. Would anyone happen to know what the OEM torque specs for the pressure plate to fly wheel are or where I can get a free...
  6. C

    LANCER FTO CONVERSION HELP

    I am currently in the middle of doing the 6a12 mivec conversion into a 2001 ce lancer. I am having trouble with the wiring side of things and need some advice when it comes to splicing the interior loom of the lancer into the fto engine loom. Any help would be much appreciated Thanks
  7. CoopsTAS

    4G15 Mirage won't rev

    Hey guys i'm extremely new to this page just after some advice/help with my 2003 mirage... So I bought this car a couple days ago and it's been running like clock work until last night when a mate decided he'd try and be funny and pull 2 plug leads off.. Car hesitated to start at first then...
  8. Josh34

    4g15 turbo help

    hey ya guys. i bought a "turbo kit" last night for my 4g15 2003 mirage. it came with basically everything i need (t25 turbo i think, exhaust manifold, 2.5" exhaust dump, all cooler pipes, evo5 interooler, "upgraded injectors" not sure on size on stock fuel rail with fuel pressor reg, new sump...
  9. D

    MAP Install

    To install a MAP sensor as a speed density option, Could this be achieved with a SAFC V1-REV2 The way that I am thinking of it is that my previous vehicle which we will not speak of as it blew up had a MAP sensor the SAFC intercepts the voltages to the ecu with two separate wires. Could I do...
  10. PurpLancer

    New to lancers need a little help

    Hay all im a new member and a bit of a noob to the lancer line of thing(iv owned a magna and a verada) iv just brought a 1994 custom lancer lift-back some of you may recognize it(if so i would love some more info on it) it has a 4g63t from a vr4 in it needing a rebuild only issue im having is my...
  11. rainbow_creeper

    car wont start ...not something simple

    not sure if theirs a thread for this but either way i was driving the other day and suddenly just up the road from home the car staled so i checked all my sensors and wires the battery fuel spark plugs all that and still wont start even if i try to clutch start theirs a odd noise now like a...
Back
Top