The Workshop Manual Thread

ARC

Administrator
Forum Administrator
Welcome to the Workshop Manual Thread.

"The CE Bible" Easy to get at any SCA store and great to have around.
http://www.supercheapauto.com.au/Pr...l-Mitsubishi-Lancer-Mirage-1996-2004-275/2628

Dropbox link for many Mitsubishi's.
EVO 1--9, CC & CE variations, GTO, Galant and more.
https://www.dropbox.com/sh/8mvxbuy0pajca2i/AADVTKTBc8hEH_6VaU7A1pZwa?dl=0

If anyone has any other links to manuals for CG or CJ, I'll happily add them to this first post.

Hopefully this should assist people with finding info a bit more easily when they are too lazy to search... Or use thier eyes in gerneal. :tongueout:
 
I know this thread is a couple of years old. Had a look at the Supercheap website and the link doesn't go anywhere exciting. They have the CB/CC manual online... does anyone know if they stock a CE manual in-store?
 
I know this thread is a couple of years old. Had a look at the Supercheap website and the link doesn't go anywhere exciting. They have the CB/CC manual online... does anyone know if they stock a CE manual in-store?
I got my CE one in store, but it was about 5 or 6 years ago now. Should still be able to get it, or at a minimun they'll order it in for you
 
i think their listing is currently broken, if you browse through the manuals section with “fits my vehicle” set to a lancer, it finds a product that’s listed as being a toyota hilux manual, but the cover picture is a lancer manual....

the current “part” number for the gregory’s manual is 04275, if you search for that on ebay/etc it’s pretty easy to find (e.g. https://www.ebay.com.au/p/MITSUBISH...rys-Service-Repair-Workshop-Manual/1429824489). supercheap had them in store a year ago (when i got mine) but maybe they don’t anymore
 
Hi, Does anyone have a 2013 CJ/LX Lancer Service Workshop Manual Book on here, or is there a Manual section here that has any uploaded. Thanks
 
Hi all,

I have a Lancer, details below that the valves got smacked by the pistons and I am now looking at doing a rebuild. I am looking for a workshop manual that deals specifically with removing and rebuilding the motor. I don't mind paying for this so long as its a quality manual.

I notice that there are references to CL & LX etc. in relation to the Lancers. From the info below I cannot fathom what mine would be - can anyone tell me:

1) what version mine is
2) where I can get a manual?

Mitsubishi Lancer 2013 - 2L
Variant: E03D02
Shape: SED
VIN/Chassis: JMFSNCY4AEU001664
Engine Number: 4B11LN6140

Thanks in advance.

JR
 
Hi all,

I have a Lancer, details below that the valves got smacked by the pistons and I am now looking at doing a rebuild. I am looking for a workshop manual that deals specifically with removing and rebuilding the motor. I don't mind paying for this so long as its a quality manual.

I notice that there are references to CL & LX etc. in relation to the Lancers. From the info below I cannot fathom what mine would be - can anyone tell me:

1) what version mine is
2) where I can get a manual?

Mitsubishi Lancer 2013 - 2L
Variant: E03D02
Shape: SED
VIN/Chassis: JMFSNCY4AEU001664
Engine Number: 4B11LN6140

Thanks in advance.

JR

Check out this link 4b11 repair manual i think this is the factory Mitsu one.
I’d advise you save it/download it in case the site ever goes down.

With valve to piston contact, make sure the head and pistons are still servicable before you buy new parts. May be better economically to purchase a second hand motor and rebuild that. That way you know the motor is not damaged and won’t be prone to damaging itself.
 
Check out this link 4b11 repair manual i think this is the factory Mitsu one.
I’d advise you save it/download it in case the site ever goes down.

With valve to piston contact, make sure the head and pistons are still servicable before you buy new parts. May be better economically to purchase a second hand motor and rebuild that. That way you know the motor is not damaged and won’t be prone to damaging itself.
Thanks @SDate42
I have pulled everything off bar the actual head which I hope to do in the next couple of days. Once done I will take it to the engineering shop to have them check it out.
 
Back
Top