Spotties on CH es

Redness1

Redness1

New Member
Just wondering if anyone's put spotties on their CH as I desperately need a set on mine (do a lot of country driving) and need some ideas on how to mount them solidly so the don't vibrate/bounce
 
Not much space to mount them, you could try install vrx spotlights, better choice would be Led light bar on top b/bar, because of its long low design should be min vibration when you mount it as metal bar frame under b/ bar cover should stop most or all vibration. I have seen spot light mounts attached to front number plates mounting point via chrome bar, don’t know how successful this particular mount method would be ?
 
I was thinking of one of those mounts that go behind the number plate but would need to attach it to the reinforcement bar somehow as the bumper wobbles as it is
 
That's the 3rd choice i mentioned above in the post, the one that attaches to the front number plate mounting point, you can get chrome or aluminium bar, like the so called "universal" supercheap one pictured below, here is link (also on ebay)

http://www.supercheapauto.com.au/Product/SCA-Driving-Light-Bar-Universal/219098
219098-thumb.jpg

I have seen them in use before on ch lancers, they are going to wobble a bit,no matter what, better off using a low profile led light bar than the old round led/non led shaped spotties, at least the light bar won't concentrate beam in one section, has a much wider spread, wont wobble as much and will be less noticeable as weight factor/profile also will effect performance/stability. Your only other option is to re-in-force area around the number plate from behind, not recommended.
 
You must log in or register to reply here.
Back
Top