Help on doing up my CJ Lancer

[Jason Adamopoulos]

Hey guys, i got a 2013 lancer VRX CJ sedan that is stock. I live in Melbourne and want to do it up nicely but don't know where to start. This is what I want done and I would like everybodies advice on how I should do my car and what would be good. I'm aiming for it to be faster and loud.
This is what I want done:
Full exhaust system (Extractors, resonator delete)
I also wanted a twin exhaust setup to mirror the evo.
Any places in Melbourne people can recommend me to and estimate how much this will all cost?

 

[Hugh-CE]

Full exhaust system can set you back up to 1500-2k if you wanted the mounts made for that twin set up too. I think the evo rear bars are somewhere in the ballpark of $350-600 on ebay or something usually unpainted.
Best to call up exhaust shops near you and enquire about a system and ask for quotes or rough estimates. Not too sure if there are pre packaged exhausts for the CJ or not. Might be best to search around the internet and if you can get a full system delivered then that'd be the go.

 

[Jason Adamopoulos]

Full exhaust system can set you back up to 1500-2k if you wanted the mounts made for that twin set up too. I think the evo rear bars are somewhere in the ballpark of $350-600 on ebay or something usually unpainted.
Best to call up exhaust shops near you and enquire about a system and ask for quotes or rough estimates. Not too sure if there are pre packaged exhausts for the CJ or not. Might be best to search around the internet and if you can get a full system delivered then that'd be the go.

Hey, thanks for the reply. I Found a rear bar here, let me know what you think of it: http://marsperformance.com.au/Evolu...-CJ-CF-lancer-Sedan-07-17-Twin-Exhaust-outlet
Thing is the same place marsperformance offer the twin muffler setup here: http://marsperformance.com.au/Evolu...fler-Exhaust-Mitsubishi-Lancer-CJ-Sedan-07-14
But its just mufflers and I want a full system so i guess that wouldnt work but what do you think about the bumper? And how would I know if I can get a full system delivered?

Thanks

 

[peregrine]

Hey guys, i got a 2013 lancer VRX CJ sedan that is stock. I live in Melbourne and want to do it up nicely but don't know where to start. This is what I want done and I would like everybodies advice on how I should do my car and what would be good. I'm aiming for it to be faster and loud.
This is what I want done:
Full exhaust system (Extractors, resonator delete)
I also wanted a twin exhaust setup to mirror the evo.
Any places in Melbourne people can recommend me to and estimate how much this will all cost?

Hey, thanks for the reply. I Found a rear bar here, let me know what you think of it: http://marsperformance.com.au/Evolu...-CJ-CF-lancer-Sedan-07-17-Twin-Exhaust-outlet
Thing is the same place marsperformance offer the twin muffler setup here: http://marsperformance.com.au/Evolu...fler-Exhaust-Mitsubishi-Lancer-CJ-Sedan-07-14
But its just mufflers and I want a full system so i guess that wouldnt work but what do you think about the bumper? And how would I know if I can get a full system delivered?

Thanks

If bar is from an EVO10 it will be too wide. but there are heaps of rear diffusers with provision for twin exhaust outlets such as mine, photo included.

Re exhaust and warranty, rear muffler generally OK, cat back 2.5inch appears to be OK. check! anything beyond Kaboom.

EDIT. Could be wrong about fit of EVO 10 bumper check it out!!!

 

[Jason Adamopoulos]

If bar is from an EVO10 it will be too wide. but there are heaps of rear diffusers with provision for twin exhaust outlets such as mine, photo included.View attachment 6088 View attachment 6089

Re exhaust and warranty, rear muffler generally OK, cat back 2.5inch appears to be OK. check! anything beyond Kaboom.

*poo* I love the rear setup of your car, Can I just ask, is that the stock rear bumper on your car with a diffuser add-on? Because I'd love to have the same set up as you got pretty much. Also a major talking point for me is how did you transition to that diffuser and change your exhaust setup to a twin outlet at the same time? Or did the stock single exhaust fit with the diffuser then when you got the twin setup you just changed the exhausts around? Thanks for the reply by the way !

 

[peregrine]

*poo* I love the rear setup of your car, Can I just ask, is that the stock rear bumper on your car with a diffuser add-on? Because I'd love to have the same set up as you got pretty much. Also a major talking point for me is how did you transition to that diffuser and change your exhaust setup to a twin outlet at the same time? Or did the stock single exhaust fit with the diffuser then when you got the twin setup you just changed the exhausts around? Thanks for the reply by the way !

Rear bumper is stock. Diffuser is a Talon diffuser from DJM Fiberglass phone (02) 4423 7201 price $275 plus postage to me in Victoria $45. Comes unpainted. with 2,
3inch S/S tips. both being able to be used either as normal with twin exhaust system, or fittings to use one as dummy, and which will stay that way for me! My exhaust is stock standard.
Fitting it to get it straight took a bit of extra effort but i generally achievable. Fitted and painted it myself, with a little help.

Look up Talon diffuser ClubCJ on the internet for more details.

PS I could be wrong about fit of rear EVO 10 bumper! Check it out!