Ok I have a 2001 ce with no power windows. But would like to change doors that have got power windows. I have looked for the plug your talking about is this it?
Ok I have a 2001 ce with no power windows. But would like to change doors that have got power windows. I have looked for the plug your talking about is this it?
The door loom plug will either be 2 wire or 6 wire. If it's 2 wire then you need to run a new dash loom from a power window model, if its 6 wire you don't.
Yeah I was unlucky as I needed to run the full dash loom as I only had 2 plugs either side. Fortunately I discovered this while the dash was out and I had a parts car handy..When I did my mirage back in the day....
My door loom only had a couple of wires for the speaker and central locking, but the original mirage interior loom had all the wires.
All I did was install and plug in the MR door loom and put in the relay and it all worked.
Power windows and mirrors and cruising... I was pretty chuffed
Where is that located? I have the new doors. There is a fuse box in the engine bay for power windows and the fuse is fine.the only place I haven't looked is under the dash and I have a aftermarket cruise control module in about that area that you have in the picture in if that the area in thinking
Where is that located? I have the new doors. There is a fuse box in the engine bay for power windows and the fuse is fine.the only place I haven't looked is under the dash and I have a aftermarket cruise control module in about that area that you have in the picture in if that the area in thinking