CE Lancer Possible Engine Conversions
- Thread starter denemay
- Start date
It will bolt into a satria, m21, cc coupe, cc sedan, persona, jumbuck and wira. Better picks are cc coupes, sedans and satrias. Especially a Satria GTi as previously mentioned. They came with a lot of extra standard equipment and were made until 2003. There are 2 types of models, one uses a mitsu ecu and the other a Siemens ecu. Do. Not. Buy. The. Seimens. Model.
Proably because they it's hard to find one thats resonably priced not thrashed and beat to hell.
Hi Kraig just put a 1.8 in a ce that had a1.5 but it wont start changed left hand side comp and wiring .have constant power to injectors but no pulse when starting hope you can help
Did you change the immobilizer unit ?
Sure does.
You need the ECU, Immobilizer and key all matching.
If you dont have a matching key you could always program in another using the guide in the DIY section.
Thanks mate changed the barrel , key reader and immoboliser this afternoon started first go runs like a charm worth every bit of the time to do the project .thanks againSure does.
You need the ECU, Immobilizer and key all matching.
If you dont have a matching key you could always program in another using the guide in the DIY section.
Hi All,
Has anyone ever put a diesel into a coupe like a 4D65 1.8Litre
https://en.m.wikipedia.org/wiki/Mitsubishi_Sirius_engine#4d63
or a 4D68 2Litre
I have a 1999 CE Lancer Coupe 1.5 Auto Hulk as the engine has died. I bought another 4D15 a guy took out of a Mirage for $50 but I don't know if it's worth swapping unless I can do it myself. The guy I bought the engine from said he was going to put a v6 in the Mirage.
Regards
John
Has anyone ever put a diesel into a coupe like a 4D65 1.8Litre
https://en.m.wikipedia.org/wiki/Mitsubishi_Sirius_engine#4d63
or a 4D68 2Litre
I have a 1999 CE Lancer Coupe 1.5 Auto Hulk as the engine has died. I bought another 4D15 a guy took out of a Mirage for $50 but I don't know if it's worth swapping unless I can do it myself. The guy I bought the engine from said he was going to put a v6 in the Mirage.
Regards
John
Do able.
Easy? No.
Worth it? No.
Easy? No.
Worth it? No.
Diesels are generally very high pressure, instead of our 40-60psi fuel rail, diesels is like 1000+
First post here, although I have done a fair bit of lurking and reading. I have read right through this thread a couple of times and got some great ideas.
I have though I think come up with a swap no one else has done, at least not that they have shared on the interwebs. I have pulled the tiny 1.5 out of my spare parts mirage and I'm dropping in a 2.6 astron II (4g54) out of a ts magna.
This is by no means a simple swap, I've had to do quite a bit of "massaging" to the car to fit the k frame from the magna into the mirage and I've still got a long, long way to go before it'll start or run, but I was so stoked today to finally slot the donk into place ( admittedly only the most basic mock up at this point) that I thought I'd post a couple of pics.
this has been and will continue to be a learning experience for me, I'm no mechanic, I've never done anything like this before, not that I'm a complete noob, I've been tinkering with bits n pieces most of my 41 years. I'm also using this project to teach myself to weld, all of this is made harder by the fact I don't even have a garage yet and I'm working in the dirt beside the house.
Anyway sorry for the novel of a first post but I had to share my progress with someone as the wife and daughter just think I'm stupid coz I have plenty of cars the already work.
Cheers
Bentaz.
I have though I think come up with a swap no one else has done, at least not that they have shared on the interwebs. I have pulled the tiny 1.5 out of my spare parts mirage and I'm dropping in a 2.6 astron II (4g54) out of a ts magna.
This is by no means a simple swap, I've had to do quite a bit of "massaging" to the car to fit the k frame from the magna into the mirage and I've still got a long, long way to go before it'll start or run, but I was so stoked today to finally slot the donk into place ( admittedly only the most basic mock up at this point) that I thought I'd post a couple of pics.
this has been and will continue to be a learning experience for me, I'm no mechanic, I've never done anything like this before, not that I'm a complete noob, I've been tinkering with bits n pieces most of my 41 years. I'm also using this project to teach myself to weld, all of this is made harder by the fact I don't even have a garage yet and I'm working in the dirt beside the house.Anyway sorry for the novel of a first post but I had to share my progress with someone as the wife and daughter just think I'm stupid coz I have plenty of cars the already work.
Cheers
Bentaz.