Ce coupe evo conversion?

M

mirykks

New Member
hey guys, was wondering if it was possible to swap an evo 4 or 5 front bumper straight from the stock ce bumper or do you have to swap fenders and headlights aswell?

Thanks
 
The radiator support panel is different too for sedan, have fun unpicking the welds!
 
or you could just hit it with the sawzall and just weld it back in! ...... I personally wouldn't but some panel beaters would ...... :(
 
mirykks said:
thanks, been looking into it some more and seems almost impossible to find evo 4 parts so started looking into body kits and found this https://www.ebay.com.au/itm/232950382035
would this require a full front end change too?
Click to expand...
That's a coupe/hatch bumper styled after the evo bumper so it should fit but you may need to make up your own mounting brackets which is pretty easy but highly recommended to avoid droop in the fiberglass over time.

Sedan front end conversions are possible but require lots of work as the front ends on the coupes / hatch are slightly different to sedans and does not directly bolt up so you have to cut / weld the fenders and rad support which turns most people off the conversion on a DIY level but after that the rest of the parts should bolt up.
 
You must log in or register to reply here.
Back
Top