2007 (jan) CH Wagon suspension-spring fitment

wagonlover

New Member
Hi there,
I have searched through the discussions and there is lots of info about coilovers and lowering.
I am wondering if the following KING springs will fit 2007 CH 2.4l wagon:
Front: KCFS-49 (unsure if these will fit the front)
Rear: KCRS-48 (fairly confident these rear ones will fit)
King Springs website suggest they fit the VRX sedan of the same year and engine.
Anyone used these before (lowered ones included as the lowered versions would likely be the same as far as all other dimensions)

I want to beef up the rear end of my wagon for towing, it seems saggy to me, and when the trailer is on it is pitiful.
I don't want to lower it, this is our family wagon and we take it camping every holidays.
I have not had much luck with the vehicle finders on the websites and matching parts to the 2007 CH 2.4l wagon
this is the best match I found but only on one website: MITSUBISHI LANCER CH CS# 2.4L 4G69 SOHC 16v MPFI 4cyl 4dr Wagon 4sp Auto FWD [08/05 - 08/08]

Will be pairing with these struts:
Front KYB Excel G 334490
Rear KYB Excel G 341342
(reasonably confident these will both fit)
 
Last edited:
Hi mate. Whereabouts are you? If melb, i have a brand new pair of H/D rear springs you can have for free.
Pretty sure they are king springs. Was a bit stiff for what i wanted so put the stock rears back in. Also sits a touch higher than stock.
 
Hi mate. Whereabouts are you? If melb, i have a brand new pair of H/D rear springs you can have for free.
Pretty sure they are king springs. Was a bit stiff for what i wanted so put the stock rears back in. Also sits a touch higher than stock.
Hey there,
Whyalla, Mid-North SA, but also in Adelaide. Can't remember which part number they were can you?
I would have to organise freight... Thanks for the generous offer.
 
I cant remember what # they were sorry. They were described as standard height or standard height heavy duty. If you can be bothered organising shipage id be happy to let you have them.
They were definitely a much heavier spring than stock (2006 ch sedan) and lifted the rear about 10-15mm.
Was a bit too firm for me as main use of my car is to hold a babyseat and already had a whiterline rear swaybar.

Also i put in the VRX version KYB gas shocks which imprroved handling and stability without sacrificing comfort.
 
Back
Top