door seals

LaNcE

LaNcE

Member
hi all,

Is there anyone there that know the P/N for the sedan door seals? ive been getting air thru the seals and would like to replace them! anyone know the cost associated with it aswell?

while im here, how much does the gbox fluid take?

thanks!
 
LaNcE said:
hi all,

Is there anyone there that know the P/N for the sedan door seals? ive been getting air thru the seals and would like to replace them! anyone know the cost associated with it aswell?

while im here, how much does the gbox fluid take?

thanks!
Click to expand...


Can't help with P/N but try placing small soft plastic/rubber tube or similar pushed in, in between seals and doors, either arrears where leaks are occurring but preferably right around if necessary. Hopefully, should fix your problem at a much reduced cost.
 
Last edited:
Apparently most fridge seal guys can sort them out quite well. Might be worth a call to your local
 
Don't know what model you have, man or auto
  • cc / ce auto is 6 lts Mitsi elc-4-sp or equiv
  • cc / ce manual is 1.8 lts Hypoid gera oil API classification GL4 sae viscosity 75w/85w
  • cg / ch auto 7.7 lts ELC-4-SP3 or equiv
  • cg/ch manual 2.2 lts API classification GL4 sae viscosity 75w/85w or 75w-90w
 
Ok , 1.5 manual box and 1.8 manual box same as above, only engine oil capacity is different by 1/2 lt.

  • cc / ce manual is 1.8 lts Hypoid gear oil API classification GL4 sae viscosity 75w/85w unless you have a 4wd then its 2.2 lts
 
You must log in or register to reply here.
Back
Top