Removing the front loom

Doomslayer

Doomslayer

Active Member
As the title states, I am curious as the the best way to remove the front loom for headlights, foglights etc

Doing a swap and can't find a way to unplug the loom as it feeds through the fender. Thanks
 
Don't need to remove it, it will separate from the engine loom. Or if you're replacing it just keep unclipping from the fuse box
 
Doomslayer said:
As the title states, I am curious as the the best way to remove the front loom for headlights, foglights etc

Doing a swap and can't find a way to unplug the loom as it feeds through the fender. Thanks
Click to expand...

When I did mine, I started where it plugs in at the drivers side footwell and just kept feeding it through till I got to the lights. Was pretty easy from there.
Had to pull off the drivers side front guard and the bumper for better access.
 
ARC said:
When I did mine, I started where it plugs in at the drivers side footwell and just kept feeding it through till I got to the lights. Was pretty easy from there.
Had to pull off the drivers side front guard and the bumper for better access.
Click to expand...

So unplug from footwell and remove then just refeed back in
 
Doomslayer said:
So unplug from footwell and remove then just refeed back in
Click to expand...

Yeah it plugs in to the BCM I think, so unplug and pull it through. Then keep going till you get to the fuse box near your battery.
 
You must log in or register to reply here.
Back
Top