Mirage 4g63t swap build parts info/list compile.

Sorry if i have missed something in this thread, but if going for a 4g69 gbox why not just use g69 shafts as well? or does the g63 not have the mount for the drivers side driveshaft?

Bingo. It may. It may not.... I can’t confirm. If it does you’d be silly not to use it
 
@Ilus1v fyi these are the mounting points on the back of the 4g69 for the driveshaft. I cant find an accurate photo of a 4g63 block to compare

View attachment 7210
I'll get some pics of the 63 tonight to try and compare.
Worst comes to worst, grind off 5mm from the block hole spots, put 5mm plate steel and locate where the mounts need to go and drill new ones into the plate.
 
Those 4g69 shafts don't bolt straight up to 4g64 block but I just made a bracket, They are great shafts I do consistent 1.6 60 foot times and the odd 1.5 and never had a problem
 
I also use a G4js gearbox bolts up to 63/64 never broken one but it is also pull clutch, and from memory a late model evo flywheel is just too big to fit inside the bell housing but they also have 27 spline diff to take 69 shafts.
 
This has sat for friggin AGES guys, so sorry for that.
I have picked up a 4g69 box, sadly they wouldn't give me the clutch that was with it, but i did manage to get the slave cyl and drive shafts out of them.
Going to buy a 69 flywheel and clutch kit over the coming weeks.
I asked the mrs for a haltech for Christmas.... didn't go well.
This things going together SLOW af at this point, but slow n steady wins the race...unless ur 4g15 slow...
 
Do you have a 4G63T to see of the bolt pattern is the same?
As I have read mixed reports, some saying it is not the same.
And does the 4G63T have provision for the intermediary shaft to connect to?

I think the above are the main issues. Otherwise a 69 clutch and flywheel should work since the flywheel bolt pattern is the same (7 bolt)
 
yea I have the engine sitting there.
if I get a chance to fart between work over the next week, I'll try and pair the 2 up to see.
everything I was able to find supported them fitting, along with some info in this thread, fingers crossed I guess.
 
I have found 4G63t from evo 4-9 will fit. evo 1-3/vr4 will not. Hyundai g4js-g4jp will fit. wide block 4g69( great wall) will not fit. good luck:smile:
 
Back
Top